High quality Cisco CCNA Data Center 200-155 dumps exam practice materials in PDF format free download from leads4pass. New Cisco CCNA Data Center 200-155 dumps vce youtube demo update free shared. “Introducing Cisco Data Center Technologies” is the name of Cisco CCNA Data Center https://www.leads4pass.com/200-155.html exam dumps which covers all the knowledge points of the real Cisco exam. Download Cisco CCNA Data Center real 200-155 dumps exam questions and verified answers. 100% passing guarantee and full refund in case of failure.
Prepare for Cisco 200-155 exam with best Cisco CCNA Data Center 200-155 dumps exam questions and answers download free try from leads4pass. The best and most updated latest Cisco CCNA Data Center 200-155 dumps pdf training resources free download. Cisco CCNA Data Center 200-155 exam preparation kit contains all the necessary 200-155 dumps exam questions that you need to know.
Vendor: Cisco
Certifications: CCNA Data Center
Exam Name: Introducing Cisco Data Center Technologies
Exam Code: 200-155
Total Questions: 101 Q&As
Best Cisco 200-155 dumps pdf practice materials: https://drive.google.com/open?id=0B_7qiYkH83VROUdnZWRYLTJta1E
Best Cisco 200-150 dumps pdf practice materials: https://drive.google.com/open?id=0B_7qiYkH83VRNFFRMURQbmZ4T1U
New Cisco CCNA Data Center 200-155 Dumps Exam Practice Questions And Answers (Q1-Q30)
QUESTION 1
Which two are benefits of Cisco Unified Fabric? (Choose two )
A. SNMPv3 strong authentication
B. reduced cabling
C. zone port distribution
D. consolidation of LAN and SAN over a common transport
E. native AES-256 encryption of data in flight
Correct Answer: BD
QUESTION 2
Refer to the exhibit. A network engineer allocates 12 physical ports to a new VDC. Which command is used to verify VDC port allocation on a Cisco Nexus switch?
A. show vdc port-membership
B. show vdc port-allocation
C. show vdc allocation
D. show vdc membership
Correct Answer: D
QUESTION 3
A network design engineer is asked to design a SAN (or a company Which two underlying principles of SAN design should be considered? Choose two.)
A. fault isolation, consolidation while maintaining isolation
B. future growth in LAN infrastructure
C. security management, preferential network security
D. scalability of LAN infrastructure, reduced Ethernet QoS complexity
E. short and long term port density and topology requirements
Correct Answer: AE
QUESTION 4
Which two adapters far Cisco UCS B-Series blade servers and C-Series rack servers allow configuration of virtual interfaces? (Choose two.)
A. M71-KR
B. P71E
C. VIC-1225
D. P81E
E. VIC-1280
Correct Answer: DE
QUESTION 5
Which option describes the STP requirements for Cisco Fabric Path?
A. MST must be configured an every Cisco Fabric Path VLAN.
B. STP is required only to resolve border link failures
C. RPVST must be configured on every Cisco Fabric Path VLAN
D. STP is not required on Cisco Fabric Path interfaces.
Correct Answer: D
QUESTION 6
Which ports on the Cisco UCS 6120XP Fabric Interconnects can operate at either 1 Gb/s or 10 Gb/s?
A. Ports 1?
B. None
C. Ports 1?
D. Ports 1?
E. Ports 17?0
Correct Answer: D
QUESTION 7
A user is trying to create a new VDC in NX-OS in global configurations mode, but receives an error message What issue prevents the user from creating Virtual Device Contexts?
A. VDCs cannot be created in global configuration mode.
B. The user is not a vdc-admin.
C. The user is not a member of the VDC Power Admin group.
D. The user is not a network-admin.
Correct Answer: D
QUESTION 8
200-155 dumps Which option describes Cisco’s virtual device context feature?
A. logical virtualization of a single physical switch
B. logical witches aggregated into a single physical switch
C. logical switches aggregated into multiple physical switches
D. multiple physical switches partitioned to a single virtual switch
Correct Answer: A
QUESTION 9
A Cisco UCS administrator wants only the Cisco UCS chassis with four connections between each IOM and the Fabric Interconnect pair to be recognized. Which policy and corresponding action must be configured?
A. Chassis/FEX Discovery Policy, Action: 4-link
B. Chassis/FEX Discovery Policy, Redundancy Action: N+1
C. Rack Management Connection Policy, Action: 4-link
D. Power Policy, Redundancy Action: Grid
E. Rack Server Discovery Policy, Action: 4-link
Correct Answer: A
QUESTION 10
Which three are the names of configuration tabs that appear in the Navigation Pane of the UCS Manager GUI? (Choose three.)
A. VLAN
B. LAN
C. VSAN
D. Policies
E. Equipment
F. Global
G. Admin
Correct Answer: BEG
QUESTION 11
Which two Cisco data center devices can participate in Fabric Path? (Choose two.)
A. Cisco MOS 9500 Series directors
B. Cisco Nexus 7000 Series Switches
C. Cisco Nexus 5500 Series Switches
D. Cisco Nexus 1000V
E. Cisco Nexus 4900 Series Switches
Correct Answer: BC
QUESTION 12
The marketing, research, and business departments of a company each have servers and storage in the SAN fabric connected to a Cisco MDS switch. The storage engineer is asked to ensure that each department’s servers and storage are isolated from the other departments. Which two steps can the engineer take to accomplish this task? (Choose two.)
A. Create VSAN 10, 11, and 12 on the MDS switch.
B. Add marketing devices to VSAN 10, research to VSAN 11, and business to VSAN 12.
C. Create VSAN 10 on the MDS switch.
D. Add marketing, research, and business devices to VSAN 10.
E. Create VSAN 10 and VSAN 11.
F. Add all storage devices to VSAN 10. Add all server devices to VSAN 11.
Correct Answer: AB
QUESTION 13
Which two modes of setup are offered on the initial setup script on a Cisco UCS Fabric Interconnect? (Choose two.)
A. Restore
B. Setup
C. Console
D. Serial
E. Management 0
Correct Answer: AB
QUESTION 14
Which two Cisco Nexus 1000V Series Switch features exceed the functionality of the VWware vNetwork Distributed Switch? (Choose two )
A. access control lists
B. QoS marking
C. Network vMotion
D. port state migration
E. DV Port Groups
Correct Answer: AB
QUESTION 15
Which of the following is a virtual technology that helps create multiple route tables that function on the same physical router?
A. VSS
B. vPC
C. VRF
D. VSAN
Correct Answer: C
QUESTION 16
Layer 3 networks can be logically separated by which technology?
A. bridge domain
B. VRF
C. VLAN
D. tenant
Correct Answer: B
QUESTION 17
What are two advantages to running Fabric Path in the data center over using Spanning Tree? (Choose two.)
A. provides multi chassis Ether Channel capabilities
B. allows every switch to send BPDUs to each other to ensure the L2 topology is synchronized
C. has L2 multipath forwarding capacities
D. uses B02 1 q trunks to ensure VLANs are propagated through the topology
E. uses TTL field to provide loop mitigation
Correct Answer: CE
QUESTION 18
A network engineer wants to configure switch ports on Cisco Nexus 2000 and 2200 Fabric Extender switches that are connected to a Cisco Nexus 5500 Series Switch. Which two options allow this configuration? 200-155 dumps (Choose two)
A. Connect to each of the Cisco Nexus 2200/2000 switches using Telnet, then configure the FEX switch ports.
B. Connect to a Cisco Nexus 5600 using Telnet, then configure the FEX switch ports.
C. Connect to each of the Cisco Nexus 2200/2000 switches using SSH, then configure the FEX switch ports.
D. Connect to each at the Cisco Nexus 2200/2000 switches using a console cable then configure the FEX switch ports.
E. Connect to a Cisco Nexus 5500 switch using SSH, then configure the FEX switch ports.
Correct Answer: BE
QUESTION 19
What are two main benefits of standardized open API’s in a multi-vendor environment? (Choose two)
A. automation
B. clustering
C. interoperability
D. centralized management
E. configuration management
Correct Answer: AD
QUESTION 20
Which two options are advantages of a spine and leaf architecture? (Choose two )
A. robust multipathing
B. traffic that is optimized for east-west communication
C. star topology
D. traffic that is optimized for north-south communication
E. exponential scalability
Correct Answer: AE
QUESTION 21
What is the primary benefit of Cisco Global Load Balancing Solution?
A. implements business continuity and disaster recovery by optimizing the DNS infrastructure
B. encrypts data communication
C. accelerates content delivery through a designated content cache engine
D. adds resiliency to the core layer of a data center
Correct Answer: A
QUESTION 22
Which Cisco Nexus 1000V component is the equivalent of a line card on a standard Cisco Nexus switch?
A. Virtual Ethernet Module
B. Virtual Supervisor Module
C. Virtual Service Blade
D. Virtual Security Gateway
Correct Answer: A
QUESTION 23
Which tool organizes workflows to automate simple and complex actions on infrastructure?
A. Cisco UCS Manager
B. Cisco UCS Director
C. Cisco DCNM
D. Cisco UCS server
Correct Answer: A
QUESTION 24
Which three are the three primary methods to configure Cisco UCS B-Series systems? (Choose three.)
A. SNMP
B. XML API
C. UCS Manager GUI
D. IPMI
E. UCS Manager CLI
F. CIM-XML
Correct Answer: BCE
QUESTION 25
Which management platform reduces server provisioning tome by automatically performing an inventory and deep discovery when new devices are attached?
A. UCS Manager
B. UCS Server
C. CDP Manager
D. Enterprise Manager
Correct Answer: A
QUESTION 26
A customer deployed Cisco B200 blades with service profiles. The customer experiences an outage on one of the Cisco B200 blades that will be replaced with a spare blade already in inventory. Which two steps should the customer take to replace the failed blade? (Choose two.)
A. Disassociate the service profile from the failed blade.
B. Associate the service profile to the spare blade.
C. Create a new service profile for the spare blade.
D. Delete the service profile from the spare blade.
E. Create a new service profile template for the failed blade.
Correct Answer: AB
QUESTION 27
Which feature monitors state transitions of components and processes in Cisco Unified Computing System?
A. finite state machine
B. state monitor
C. state manager
D. discovery
E. logical state arbiter
Correct Answer: A
QUESTION 28
A network engineer is migrating the server farm from 1 Gb/s Ethernet connectivity la 10 Gb/s Ethernet connectivity What two Cisco Nexus Fabric Extenders support 10 Gb/s server connectivity? 200-155 dumps (Choose two.)
A. Nexus 2148T
B. Nexus 2232PP
C. Nexus 2248TP
D. Nexus 2248PQ
E. Nexus 2224TP
Correct Answer: BD
QUESTION 29
Which statements are valid for a local SPAN configuration’? (Choose two.)
A. Source and destination interface must be on the same host
B. Source and destination interfaces can be on different hosts
C. Destination vEthernet interface can be on a different VLAN than the source
D. Destination interface can be a physical port
E. Destination interface cannot be a physical port
Correct Answer: AD
QUESTION 30
When using a Cisco UCS Director, a typical workflow consists of which two terms? (Choose Two )
A. Resource Manager
B. Workflow Designer
C. Scheduler
D. Activity Planner
E. Predefined Tasks
Correct Answer: BE
Latest Cisco CCNA Data Center 200-155 dumps pdf practice files and study guides free download from leads4pass. The best useful Cisco CCNA Data Center https://www.leads4pass.com/200-155.html dumps pdf training resources which are the best for clearing 200-155 exam test, and to get certified by Cisco CCNA Data Center, download one of the many PDF readers that are available for free with high pass rate.
Useful Cisco CCNA Data Center 200-155 dumps vce youtube demo:
https://youtu.be/MHDYkPVUMBQ
Here Are Some Reviews From Our Customers:
You can click here to have a review about us: https://www.resellerratings.com/store/leads4pass
Why Choose leads4pass?
High quality IT learning materials offered by the best provider leads4pass. From the following picture, you can see there is a difference between leads4pass and other brands. Other brands started earlier, but the questions are not the latest and it is very expensive. leads4pass provide the cheapest and newest questions with high pass rate, pass Cisco 200-155 exam easily.
