The latest CCNP Service Provider 300-515 dumps are the best clearance plan for the 300-515 SPVI Exam for all candidates!
The Implementing Cisco Service Provider VPN Services v1.0 (SPVI 300-515) exam is a 90-minute exam associated with the CCNP Service Provider and Cisco Certified Specialist – Service Provider VPN Services Implementation certifications.
This exam tests candidates’ knowledge of implementing service provider VPN services, including Layer 2, Layer 3, and IPv6. Implementing Cisco Service Provider VPN Service 300-515 dumps can help candidates prepare for this exam.
I believe all candidates understand how big the VPN market is! There are so many popular VPN clients on the market now, which is enough to prove that obtaining a certificate will help you get greater opportunities.
So the gold content of the 300-515 SPVI Exam certificate is very large, the condition is that you must obtain the certificate, so I provide CCNP Service Provider 300-515 dumps to realize the candidate’s dream: https://www.leads4pass.com/300-515.html, Best solution for 300-515 SPVI Exam.
Share Implementing Cisco Service Provider VPN Services (300-515 SVPI) topic exam questions online to prepare you ahead of time for the exam. These free exam practice questions are from
Part of CCNP Service Provider 300-515 dumps!
300-515 SVPI Topic Exam Questions
| From | Number of exam questions | Associated certifications |
| leads4pass | 15 | CCNP Service Provider |
Question 1:
Refer to the exhibit. An engineer is trying to configure an EVPN VWPS. What is the issue with this configuration?
A. The member in the VPWS context should be the PE-facing interface.
B. The 12vpn even command should be instance 101.
C. Interface GigabitEthernet0/1/0 should not have any IP address.
D. The service instance and the EVPN instance are different.
Correct Answer: C
Question 2:
What does EVPN single-active and all-active have in common?
A. They are default gateway redundancy options.
B. They are multihoming mechanisms used for CE devices.
C. They are used to provide a single connection from a CE device to a service provider.
D. They are both roles that a designated router can take when MPLS is used with EVPN.
Correct Answer: D
Question 3:
In an Ethernet Virtual Circuit environment, which restriction do bridge domains have when STP is running?
A. The STP mode must be RSTP or PVST+
B. Bridge domains must be mapped to a different VLAN.
C. The STP mode must be MSTP
D. Bridge domains must belong to different MST instances.
Correct Answer: C
Question 4:
Which mechanism reduces the network flooding caused by host ARP learning behavior?
A. ARP suppression
B. storm control
C. root guard
D. BPDU guard
Correct Answer: A
Question 5:
While implementing Layer 3 MPLS VPN, which feature should an engineer use at the PEs to transform the customer IPv4 prefixes into a unique 96-bit prefix?
A. RT
B. VC ID
C. RD
D. PW ID
Correct Answer: C
Question 6:
Which two are characteristics of using a non-MPLS peer-to-peer model over a traditional overlay model? (Choose two.)
A. The model is suited for nonredundant configurations.
B. The configuration on a newly added site PE is updated automatically.
C. Provider routers know the customer network topology.
D. The customer specifies the exact site-to-site traffic profile.
E. Routing information is exchanged between the customer router and one or a few PEs.
Correct Answer: CE
Question 7:
DRAG DROP
Drag and drop the EVPN components from the left onto the correct planes on the right.
Select and Place:
Correct Answer:
Reference: https://www.cisco.com/c/dam/m/en_us/network-intelligence/service-provider/digital-transformation/knowledge-network-webinars/pdfs/0420-epn-ckn.pdf slide 8
Question 8:
In Layer 3 MPLS VPN implementations, if some of the VPNv4 routes on one PE router do not appear on another PE router, what could be the problem?
A. RD mismatch between the PE routers
B. RT export and import configuration errors
C. VRF name mismatch between the PE routers
D. RD export and import configuration errors
Correct Answer: B
Reference: http://blog.initialdraft.com/archives/1537/
Question 9:
Refer to the exhibit.
An engineer has configured router 1 to provide shared services to clients behind router 2.
To complete the implementation so that routes from router 1 are accepted, what must the engineer configure on router 2?
A. with import route targets 101:102 and 202:201
B. with import route targets 201:202 and 401:402
C. with export route targets 301:202 and 101:102
D. with export route targets 201:202 and 401:402
Correct Answer: B
Question 10:
Refer to the exhibit. Which statement about this configuration is true?
A. Router 1 will accept multicast routes with a route target of 12:1.
B. 192.168.1.2 must be reachable by all routers participating in the VPN-intranet MVRF.
C. Router 1 has statically defined thresholds for data MDT.
D. The MVRF must be configured on each router on the customer and service provider networks.
Correct Answer: A
Question 11:
Refer to the exhibit. What is the effect of this configuration?
A. The route table is cleared.
B. Router 1 accepts multicast routes with a tag of 12:1
C. A Cisco MPLS TE tunnel is generated with 192.168.1.2 as the source IP address of router 1.
D. An LSP virtual interface tunnel is created.
Correct Answer: B
Question 12:
While troubleshooting an AToM L2VPN service, a network consultant notices that the AC Layer 2 encapsulations are different. Which action should the consultant take in order to make the MPLS L2VPN work?
A. tag-rewrite on the ingress and egress PE router
B. interworking IP configuration on the last PE router before label disposition
C. nonrouted interworking setup to properly translate only the Layer 2 information from the AC
D. interworking IP configuration on both the AC terminations on the PEs
Correct Answer: D
Question 13:
The network engineering group of a large ISP needs to harden the management plane of its Cisco 9000 Series ASRs. While addressing IPv6 ICMP issues, they realized they have to limit the rate at which IPv6 ICMP error messages are sent out on the network. Which command do they need to apply?
A. ICMP ipv6 rate-limit unreachable 1000
B. ipv6 rate-limit 1000
C. ICMP ipv4 rate-limit unreachable 1000
D. ipv6 ICMP error-interval 50 20
Correct Answer: D
Question 14:
A network engineer is implementing Layer 3 MPLS VPNs on Cisco IOS/IOS XE PE routers. Which PE-to-CE routing protocol requires a separate routing process to be created for each VRF?
A. RIPv2
B. OSPF
C. BGP
D. EIGRP
Correct Answer: B
Question 15:
Refer to the exhibit. Which effect of this configuration is true?
A. It configures VPWS multihomed.
B. It configures VPWS single-homed.
C. It configures an IPv4 peering with 192.168.1.1
D. It configures MPLS traffic engineering.
Correct Answer: B
Reference: https://www.ciscolive.com/c/dam/r/ciscolive/emea/docs/2019/pdf/BRKSPG-2798.pdf
…
The Cisco 300-515 SPVI exam topic covers knowledge of VPN services including Layer 2, Layer 3, and IPv6, and is a certification I personally really like! Really fit the market demand!
Many friends, including me, have passed the Cisco 300-515 SPVI exam, and they are now serving major VPN service providers!
Recommend candidates to practice 71 latest CCNP Service Provider 300-515 exam questions: https://www.leads4pass.com/300-515.html (300-515 dumps), guarantee you 100% pass the 300-515 SPVI Exam!