300-430 ENWLSI is the acronym for Implementing Cisco Enterprise Wireless Networks exam certification, using 300-430 dumps to help you successfully pass the CCNP Collaboration 300-430 ENWLSI Certification Exam on the first attempt.
300-430 ENWLSI Certification Exam is one of the specific topics in the CCNP Collaboration concentration exam, and if you want to be certified by CCNP Collaboration, you will also need to take the CCNP Collaboration Core Exam (350-401 ENCOR), so, I recommend you to use the leads4pass 300-430 dumps: https://www.leads4pass.com/300-430.html, to help you pass one of the CCNP Collaboration intensive exams, 350-401 dumps are available in leads4pass.
leads4pass 300-430 exam dumps contain 162 exam questions and answers and provide both PDF and VCE study modes. You just need to practice all the 300-430 dumps questions carefully to make sure you pass the 300-430 ENWLSI Certification Exam with ease.
You can first detect CCNP Collaboration 300-430 free dumps
Updated 2022.7
QUESTION 1:
A Cisco 8540 WLC manages Cisco Aironet 4800 Series APs and sends AoA data to a Cisco CMX 3375 Appliance for Hyperlocation. The load from the WLC is distributed to another virtual CMX server using CMX grouping. The virtual CMX server shows location RSSI data and not Hyperiocation. No AOA metrics are shown on the metrics page of the CMX virtual appliance under System > Metrics > Location Metrics.
How must the network administrator RESOLVE THIS ISSUE?
A. Allow port 2003 for AoA packets to flow through between the CMX appliances.
B. Enable Wireless > Access Points > Global configuration > Enable Hyperlocation on the WLC.
C. Use one Hyperlocation-enabled WL.C and CMX for AoA data
D. Enable the HALO module on the CMX appliance for the data collection
Correct Answer: C
QUESTION 2:
Where is Cisco Hyperlocation enabled on a Cisco Catalyst 9800 Series Wireless Controller web interface?
A. Policy Profile
B. AP Join Profile
C. Flex Profile
D. RF Profile
Correct Answer: B
QUESTION 3:
An engineer wants to upgrade the APs in a Cisco FlexConnect group. To accomplish this upgrade, the FlexConnect AP Upgrade setting will be used One AP of each model with the lowest MAC address in the group must receive the upgrade directly from the controller.
Which action accomplishes this direct upgrade?
A. Reboot all APs before the upgrade.
B. Remove the APs from the group
C. Do not set any master APs. 9 0
D. Allocate the master APs to different groups
Correct Answer: D
QUESTION 4:
The Cisco Hyperlocation detection threshold is currently set to -50 dBm. After reviewing the wireless user location, discrepancies have been noticed. To improve the Cisco Hyperlocation accuracy, an engineer attempts to change the detection threshold to -100 dBm However, the Cisco Catalyst 9800 Series Wireless Controller does not allow this change to be applied.
What actions should be taken to resolve this issue?
A. Place the APs to monitor the mode shutdown of the radios, and then change the Cisco Hyperlocation detection threshold
B. Shut down all radios on the controller, change the Cisco Hyperlocation detection range, and enable the radios again.
C. Disable Cisco Hyperlocation. change the Cisco Hyperlocation detection threshold and then enable it
D. Create a new profile on Cisco CMX with the new Cisco Hyperlocation detection range, and apply it to the WL AN.
Correct Answer: C
QUESTION 5:
A network engineer has been hired to perform a new MSE implementation on an existing network. The MSE must be installed in a different network than the Cisco WLC.
Which configuration allows the devices to communicate over NMSP?
A. Allow UDP/16113portonthe central switch.
B. Allow TCP/16666 port on the router.
C. Allow TCP/16113 port on the firewall.
D. Allow UDP/16666 port on the VPN router.
Correct Answer: C
QUESTION 6:
Which devices can be tracked with the Cisco Context-Aware Services?
A. wired and wireless devices
B. wireless devices
C. wired devices
D. Cisco certified wireless devices
Correct Answer: A
QUESTION 7:
A network engineer needs to configure multicast in the network. The implementation will use multiple multicast groups and PIM routers.
Which address provides automatic discovery of the best RP for each multicast group?
A. 224.0.0.13
B. 224.0.0.14
C. 224.0.1.39
D. 224.0.1.40
Correct Answer: D
QUESTION 8:
A Cisco CMX 3375 appliance on the 10.6.1 version code counts duplicate client entries, which creates wrong location analytics. The issue is primarily from iOS clients with the private MAC address feature enabled. Enabling this feature requires an upgrade of the Cisco CMX 3375 appliance in a high availability pair to version 10.6.3. SCP transfers the Cisco CMX image, but the upgrade script run fails.
Which configuration change resolves this issue?
A. Upgrade the high availability pair to version 10.6.2 image first and then upgrade to version 10.6.3.
B. Save configuration and use the upgrade script to upgrade the high availability pair without breaking the high availability.
C. Break the high availability using the cmxha config disable command and upgrade the primary and secondary individuality.
D. Run root patch to first upgrade to version 10.6.2 and then migrate to version 10.6.3.
Correct Answer: C
QUESTION 9:
An engineer has implemented 802.1x authentication on the wireless network utilizing the internal database of a RADIUS server. Some clients reported that they are unable to connect. After troubleshooting, it is found that PEAP authentication is failing. A debug showed the server is sending an Access-Reject message.
Which action must be taken to resolve authentication?
A. Use the user password that is configured on the server.
B. Disable the server certificate to be validated on the client.
C. Update the client certificate to match the user account.
D. Replace the client certificates from the CA with the server certificate.
Correct Answer: B
QUESTION 10:
An engineer configured a Cisco AireOS controller with two TACACS+ servers. The engineer notices that when the primary TACACS+ server fails, the WLC starts using the secondary server as expected, but the WLC does not use the primary server again until the secondary server fails or the controller is rebooted.
Which cause of this issue is true?
A. Fallback is enabled
B. Fallback is disabled
C. DNS query is disabled
D. DNS query is enabled
Correct Answer: B
QUESTION 11:
When configuring a Cisco WLC, which CLI command adds a VLAN with a VLAN ID of 30 to a FlexConnect group named BranchA-FCG?
A. config flexconnect BranchA-FCG vlan 30 add
B. config flexconnect group BranchA-FCG vlan add 30
C. config flexconnect group BranchA-FCG vlan 30 add
D. config flexconnect BranchA-FCG vlan add 30
Correct Answer: B
QUESTION 12:
Refer to the exhibit.
A network administrator deploys the DHCP profiler service in two ISE servers: 10.3.10.101 and 10.3.10.102. All BYOD devices connecting to WLAN on VLAN63 have been incorrectly profiled and are assigned as unknown profiled endpoints.
Which action efficiently rectifies the issue according to Cisco recommendations?
A. Nothing needed to be added to the Cisco WLC or VLAN interface. The ISE configuration must be fixed.
B. Disable DHCP proxy on the Cisco WLC.
C. Disable DHCP proxy on the Cisco WLC and run the IP helper-address command under the VLAN interface to point to DHCP and the two ISE servers.
D. Keep DHCP proxy enabled on the Cisco WLC and define a helper-address under the VLAN interface to point to the two ISE servers.
Correct Answer: C
QUESTION 13:
The marketing department creates a promotion video for the branch store. Only interested hosts must receive the video over wireless multicast.
What allows this feature?
A. DCA
B. WMM
C. WMF
Correct Answer: C
……
[Google Drive] Download the above CCNP Collaboration 300-430 free dumps:https://drive.google.com/file/d/1UdKgedzgrz8_oUkBjx3kWoKmMv8rrO70/
Click here for 162 latest updates on CCNP Collaboration 300-430 ENWLSI Certification Exam Best Materials.