“Microsoft Dynamics 365 for Finance and Operations, Manufacturing” Exam MB-320. Candidates for this exam are functional consultants who analyze business requirements and translates those requirements into
fully realized business processes and solutions that implement industry best practices. Candidates serve as a key resource in
implementing and configuring applications to meet business requirements.
Candidates for this exam have a fundamental understanding of accounting principles and financial operations of businesses,
customer service, field service, manufacturing, retail, and supply chain management concepts.
Here you can get the latest free MB-320 exam exercise questions and answers for free and easily improve your skills!
MB-320 exam
Candidates for this exam typically specialize in one or more feature sets of Microsoft Dynamics 365 Finance and Operations, including finance, manufacturing, and supply chain management. Candidates must have knowledge of basic accounting principles and practices.
Follow the link to find more information about https://www.leads4pass.com/mb-320.html exam.
Watch the Microsoft MB-320 video tutorial online
Table of Contents:
- Latest Microsoft MB-320 pdf
- Test your Microsoft MB-320 exam level
- Related MB-320 Popular Exam resources
- Get Lead4Pass Coupons (12% OFF)
- What are the advantages of Lead4pass?
Latest Microsoft MB-320 pdf
[PDF] Free Microsoft MB-320 pdf dumps download from Google Drive: https://drive.google.com/open?id=1qEXY_dDKGGjbG60kAb8HH4LRL_JGNpW2
Exam MB-320: Microsoft Dynamics 365 for Finance and Operations, Manufacturing：https://www.microsoft.com/en-us/learning/exam-MB-320.aspx
Skills measured
- Set up and configure manufacturing (30-35%)
- Create and manage production and lean orders (25-30%)
- Create, process, and manage production batch orders (40-45%)
Free Microsoft MB-320 Exam Practice Questions
QUESTION 1
Note: This question is part of a series of questions that present the same scenario. Each question in the series contains
a unique solution that might meet the stated goals. Some questions sets might have more than one correct solutions,
while others might not have a correct solution.
After you answer a question in this section, you will NOT be able to return to it. As a result, these questions will not
appear in the review screen.
A company implements Dynamics 365 for Finance and Operations for their Lean manufacturing environment.
There has been an engineering change to a fixed quantity product that is in production. This change will add an
additional processing step as the second step. The existing version must be phased out and replaced by the new
version.
You need to ensure that the engineering change takes affect at the end of the month.
Solution:
1.) Add a new version to the existing production flow. Set the expiration date to the end of the month.
2.) Create an activity for the new process step and add it in the proper sequence
3.) Create a Kanban rule that incorporates the new activity. Set the expiration date to the end of the month.
4.) Edit the existing Kanban rule. Set the expiration date to the end of the month. Specify the new Kanban rules as the
replacement rule
Does the solution meet the goal?
A. Yes
B. No
Correct Answer: B
QUESTION 2
A company produces various products using Process manufacturing.
The manufacturer makes two co-products from a formula and rarely produces the primary formula item. The costs of
making the co-products are inflated. The manufacturer must update the costs of producing the co-products and change
the
formula to not produce the primary formula item.
You need to change the primary formula item type.
What should you do?
A. Associate the costs to produce by-products with the items
B. Change the primary formula item to use the planning item type
C. Change the cost of the primary formula item to zero and then recalculate the item cost
D. Change the production type to Bill of materials and recalculate the item cost
Correct Answer: B
QUESTION 3
A manufacturer uses discreet orders and manually consumes raw material after reporting products as finished.
You are performing an end-of-month closing for remaining picking lists on production orders. You must not be required
to consume the full amount of material on production order picking lists as a result of improved production efficiency.
When the production manager verifies that no material is left to consume, there are remaining back-ordered amounts.
You need to pick the line item short and eliminate the remaining demand.
What should you do?
A. Delete the item from the Bill of materials for the finished good.
B. Enter the consumption amount on the line to match the actual amount used, and delete the remaining amount.
C. Enter the consumption amount on the line to match the actual amount used and select end on the production order
picking list.
D. Change the Coverage group on item option to manual.
Correct Answer: C
QUESTION 4
A pharmaceutical manufacturer uses Process manufacturing.
You are consolidating planned batch orders for a specific medication. The order must cover two weeks of demand. No
other items need to be consolidated.
You need to change the coverage group of the items.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to
the answer area and arrange them in the correct order
Select and Place:
Correct Answer:
QUESTION 5
You are the production scheduler at a manufacturing company. The company is not using advanced warehousing.
You have firmed a planned production order from master planning. The order is ready to be processed.
You now need to process the order in production control.
What should you do first?
A. Report the order as finished
B. Estimate the order
C. Schedule the order
D. Start the order
Correct Answer: B
QUESTION 6
A skateboard manufacturer uses route operations to schedule resources and estimate units per hour. All products use
the sample sub assembly item and resource sanding process.
You observe an increase in the number of units a sanding belt resource can produce. The production schedule is now
inaccurate due to the number of units the sanding belt line can produce.
You must make a permanent change to the number of units the resource can produce for all future orders.
You need to adjust the process quantity on the route operation.
Which three actions should you perform in sequence? To answer, move the appropriate actions form the list of actions
to the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 7
A company manufactures high-end speakers. Customers may choose different color finishes and front grills. You build a
product configuration model to represent this speaker. You add the following attributes for the finish and grill.
You need to create a constraint that defines the allowable finish and grill combinations.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions
and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 8
A company implements Dynamic 365 for Finance and Operations. You run the latest master plan. You observe invalid
results.
You need to set up tracing for the master plan.
In which order should you perform the actions? To answer, move all actions from the list of actions to the answer area
and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 9
You are responsible for product and formula maintenance for a paint manufacturer.
You create a formula for white paint and add its lines. When the formula size increases or an ingredient changes, the
quantity of the pigment ingredient must be adjusted proportionately.
You need to set up the formula line for the pigment.
Which formula feature should you use?
A. Pegged supply
B. Step consumption
C. Scalable
D. Variable
Correct Answer: C
References: https://docs.microsoft.com/en-us/dynamics365/unified-operations/supply-chain/production-control/formulas-versions#use-the-scalable-feature
QUESTION 10
You are the production supervisor at a manufacturing company. You are in the process of configuring the production
control module and its parameters.
A company plans to use manufacturing execution. Bill of materials (BOM) item consumption must be generated when
items are reported at the operation level.
You need to configure the Manufacturing execution production order defaults form to allow for back flushing on
operations.
How should you set up Automatic BOM consumption? To answer, drag the appropriate setting to the correct targets.
Each source may be used once, more than once, or not at all. You may need to drag the split bar between panes or
scroll to
view content.
NOTE: Each correct selection is worth one point.
Select and Place:
Correct Answer:
QUESTION 11
You work for a gem wholesaler that sells raw diamonds. Diamonds are purchased and sold in individual boxes but
weighed and inventoried in carats.
You are setting up a catch weight item for diamonds. Each box of diamonds must be tracked by its individual container
weight.
You need to set up this item as a full visibility catch weight item.
Which two steps must you perform? Each correct answer presents part of the solution.
NOTE: Each correct selection is worth one point.
A. Assign it a Serial number group with per qty. defined as 1.
B. Assign the item a Tracking dimension group with active serial number control.
C. Create an inter-class unit of measure conversion between boxes and carats.
D. Assign a Tracking dimension group with batch number as the only active tracking dimension.
Correct Answer: BC
References: https://docs.microsoft.com/en-us/dynamicsax-2012/appuser-itpro/create-a-catch-weight-item-with-full-visibility
QUESTION 12
A company manufactures automobile engines.
You must create product configurations for values that are used in different types of engines. Each value is based on a
master valve design. Different gaskets and fittings are used to allow valves to work with different engines.
You need to translate production plans into Dynamics 365 Finance and Operations elements.
Which four actions should you perform in sequence? To answer, move the appropriate actions from the list of actions to
the answer area and arrange them in the correct order.
Select and Place:
Correct Answer:
QUESTION 13
A company is looking to use Dynamics 365 for Finance and Operations.
The company is in the process of redesigning and retooling an existing manufacturing plant to support a large long-
running contract. They want to be able to forecast capacity to easily ramp up for additional products.
You need to set up the environment.
Which type of manufacturing should you implement?
A. Lean
B. Discrete
C. Job shop
D. Process
Correct Answer: C
Related MB-320 Popular Exam resources
| title | youtube | Microsoft | lead4pass | Lead4Pass Total Questions | |
|---|---|---|---|---|---|
| Microsoft | lead4pass MB-320 dumps pdf | lead4pass MB-320 youtube | Exam MB-320: Microsoft Dynamics 365 for Finance and Operations, Manufacturing | https://www.leads4pass.com/mb-320.html | 102 Q&A |
| lead4pass MB-300 dumps pdf | lead4pass MB-300 youtube | Exam MB-300: Microsoft Dynamics 365 Unified Operations Core | https://www.leads4pass.com/mb-300.html | 97 Q&A |
Get Lead4Pass Coupons(12% OFF)
What are the advantages of Lead4pass?
Lead4pass employs the most authoritative exam specialists from Microsoft, Cisco, IBM, CompTIA, etc. We update exam data throughout the year. Highest pass rate! We have a large user base. We are an industry leader! Choose Lead4Pass to pass the exam with ease!
Summarize:
It’s not easy to pass the Microsoft exam, but with accurate learning materials and proper practice, you can crack the exam with excellent results. Lead4pass provides you with the most relevant learning materials that you can use to help you prepare.