December 21, 2024

Citrix

Practice for your Citrix 1Y0-A26 exam with the help of leads4pass, leads4pass is the best site for providing online preparation material for 1Y0-A26 exam. Get your Citrix CCA 1Y0-A26 dumps exam preparation questions in form of 1Y0-A26 PDF. “Citrix XenServer 6.0 Administration” is the name of Citrix CCA https://www.leads4pass.com/1y0-a26.html exam dumps which covers all the knowledge points of the real Citrix exam. It is the best choice for you to pass Citrix 1Y0-A26 exam.

New Citrix CCA 1Y0-A26 dumps pdf files and vce youtube demo update free shared. The best and most updated latest Citrix CCA 1Y0-A26 dumps exam training resources in PDF format download free try from leads4pass. Download Citrix CCA real 1Y0-A26 dumps exam questions and verified answers. 100% passing guarantee and full refund in case of failure.

Vendor: Citrix
Certifications: CCA
Exam Name: Citrix XenServer 6.0 Administration
Exam Code: 1Y0-A26
Total Questions: 125 Q&As

Latest Citrix 1Y0-A26 dumps pdf practice files: https://drive.google.com/open?id=0B_7qiYkH83VRVTY2VzE4YnR4bUE

Latest Citrix 1Y0-A28 dumps pdf practice files: https://drive.google.com/open?id=0B_7qiYkH83VRRjVoUlNkY3hPRVE

Helpful Latest Citrix CCA 1Y0-A26 Dumps Exam Practice Questions And Answers (Q1-Q35)

QUESTION 1
Scenario: An administrator is unable to connect to a resource pool in a XenServer environment in which high availability is enabled. The administrator discovers that the host is unreachable.
What does the administrator need to do to recover the host?
A. Run the pool-disable command, then the host-shutdown command and then restart the host.
B. Run the pool-disable command, then run the pool-emergency-reset-master command and restart the host.
C. Run the emergency-ha-disable command, then once the host is restarted, run the pool-ha- enable command.
D. Run the host-evacuate command, then restart the host and run the pool-emergency- transition- to-master command.
Correct Answer: C

QUESTION 2
Scenario: In an environment with high availability enabled, an administrator discovered that a host is unreachable in a XenServer pool. The administrator disabled high availability in order to make the host reachable.
Which xe CLI command can the administrator run to make the host reachable again?
A. host-disable
B. host-evacuate
C. pool-designate-new-master
D. pool-emergency-reset-master
Correct Answer: D

QUESTION 3
An administrator needs to run commands to specify to configure email alerts at the host level. (Choose the correct option to complete the sentence.)
A. alarm_priority on the host
B. alarm_priority on the virtual machine
C. the sender email address and SMTP server
D. the recipient email address and SMTP server
Correct Answer: D

QUESTION 4
An administrator needs to authenticate all users when they log into the XenServer pool using their Windows credentials.
What is the first step the administrator must take to achieve this?
A. Join the XenServer pool to the domain.
B. Add each user to the Users tab in XenCenter.
C. Create a XenServer user group within Active Directory.
D. Create Active Directory accounts for the XenServer users.
Correct Answer: A

QUESTION 5
What must be true in order to integrate Active Directory authentication with a XenServer host?
A. LDAP port 389 is open for inbound traffic to the XenServer host.
B. The Active Directory administrator account is created locally on the XenServer host.
C. The same DNS server is used for both the Active Directory server and the XenServer host.
D. RAS authentication is used for communication between the Active Directory server and the XenServer host.
Correct Answer: C

QUESTION 6
Scenario: An administrator configured XenServer Role Based Access Control (RBAC) to authenticate using Active Directory.
Using RBAC, the administrator must grant Level 2 Support users with permission to start and stop virtual machines.
Which two steps must the administrator take to grant Level 2 Support users virtual machine permissions? (Choose two.)
A. Assign a role to the subject.
B. Add an Active Directory group to the pool.
C. Assign XenServer permissions to a group.
D. Add users and their roles to the authorized list of users.
Correct Answer: AB

QUESTION 7
An administrator was given new security rules and now needs to remove specific permissions from the users in the VM Admin Role Based Access Control group.
How can the administrator remove the specific permissions from the VM Admin user group?
A. Reset the VM Admin user group back to the default permissions.
B. Delete the registry key that applies to the specific permissions that need to be removed.
C. Run the xe subject-role-remove uuid= role-name=vm.pool_migrate XenServer command.
D. Remove the specific permissions from the Active Directory user group associated with the VM Admin user group.
Correct Answer: C

QUESTION 8
Scenario: An administrator is planning to introduce 100 new virtual machines into the environment. The administrator plans to use XenServer templates andduplication mechanisms. 1Y0-A26 dumps
What must the administrator consider when deciding between the full copy and fast clone duplication mechanisms?
A. A template needs to be copied before it can be fast cloned.
B. A virtual machine that is duplicated using the full copy method may impact disk performance.
C. A virtual machine that is duplicated using the fast cloned method may impact disk performance.
D. A template created on local storage can be duplicated by using the full copy method by any host in the pool.
Correct Answer: C

QUESTION 9
An administrator cloned a template into a virtual machine and then converted it back into a template.
Which action must be performed on the disks to restore expected levels of disk performance?
A. Run SysPrep
B. Complete a full copy
C. Execute a fast clone
D. Suspend before cloning
Correct Answer: B

QUESTION 10
Which item in the Provisioning Services Console will the administrator need to configure to delete a machine account from the Active Directory domain?
A. Farm
B. vDisk
C. Server
D. Target Device
Correct Answer: D

QUESTION 11
An administrator notices that the target device is NOT starting from a newly created vDisk, but other target devices using different vDisks are working.
Which action can the administrator take to correct this issue?
A. Restart the Stream Service.
B. Enable streaming on the vDisk.
C. Reset the Active Directory machine account password.
D. Change the vDisk access mode to Private Image mode.
Correct Answer: B

QUESTION 12
An administrator needs to configure a Provisioning services environment for Microsoft volume license management.
Which properties could the administrator configure to accomplish this task?
A. Farm
B. vDisk
C. Server
D. Target device
Correct Answer: B

QUESTION 13
Scenario: An administrator is delivering Windows virtual machines using Provisioning services. The administrator needs to reduce the impact on Provisioning services disk consumption as well as maintain user operating system modifications.
Which cache mode must be used in this scenario?
A. Cache on Server
B. Cache in Device RAM
C. Cache on Server Persisted
D. Cache on Device Hard Drive Persisted
Correct Answer: D

QUESTION 14
Scenario: An administrator is in charge of distributing streamed Windows desktops to users using Provisioning services. Users have reported that they CANNOT access any printers while using the streamed desktops. The administrator has confirmed local printers are installed in the base image.
What could be causing this issue?
A. Printer drivers are NOT configured.
B. Network printers are NOT assigned to the users.
C. Active Directory printers are assigned to the users.
D. Printer Management is enabled in the vDisk properties.
Correct Answer: D

QUESTION 15
A XenServer administrator is updating a shared disk image used by multiple virtual machines.
What must the administrator do before updating the shared disk image?
A. Copy CIM.EXE to the vDisk.
B. Modify the vDisk cache type.
C. Disable streaming of the vDisk.
D. Change the vDisk access mode.
Correct Answer: D

QUESTION 16
Scenario: An administrator manages an environment with 200 private virtual machine images that need to be updated. Snapshots are NOT being used and the virtual machines have been customized by the users.
Which step must the administrator take to update these images?
A. Enable automatic updates.
B. Merge differencing disk files.
C. Change the vDisk access mode.
D. Update each of the vDisks individually.
Correct Answer: D

QUESTION 17
Scenario: An administrator created a single vDisk in the Provisioning Services Console that will be delivered to multiple target devices. The operating system must save user changes to applications.
Which two options did the administrator select while preparing the vDisk? (Choose two.)
A. Private Image mode
B. Cache in Device RAM
C. Standard Image mode
D. Cache on Hard Drive Persistent
Correct Answer: CD

QUESTION 18
An administrator needs to modify an application contained within a vDisk that is currently being used by multiple target devices.
Which option must the administrator select on the vDisk in order to modify the application? 1Y0-A26 dumps
A. Cache on Server
B. Private Image mode
C. Standard Image mode
D. Cache on Device Hard Disk
Correct Answer: B

QUESTION 19
An administrator needs to add a new group of similar computers to an existing Provisioning services farm.
Which type of resource could the administrator create in Provisioning services?
A. Farm
B. Store
C. Target Device
D. Device Collection
Correct Answer: D

QUESTION 20
An administrator has two datacenters, each of which has its own storage that can only be accessed by hosts that are in the same datacenter.
What could the administrator create to ensure that each host can only access its assigned storage?
A. Site
B. Store
C. Target device
D. Device collection
Correct Answer: A

QUESTION 21
Scenario: An administrator CANNOT use XenCenter to manage an existing XenServer host in a resource pool. The administrator found that the XenServer host CANNOT communicate properly with XAPI.
What could be causing the communication issue on the failed host?
A. Dom0 is out of space.
B. NTP is NOT configured.
C. The root password is unknown.
D. The host CANNOT connect to Active Directory.
Correct Answer: A

QUESTION 22
Scenario: An administrator manages six XenServer hosts in a resource pool in which high availability is enabled. The administrator is notified that host fencing occurred.
Which two reasons could be causing the issue? (Choose two.)
A. CPU utilization reached 90%.
B. The resource pool is overcommitted.
C. The shared storage repository was disconnected.
D. There was a XenServer management network outage.
Correct Answer: CD

QUESTION 23
An administrator CANNOT use XenCenter to connect to an existing standalone XenServer host that has six virtual machines running.
What could be causing this issue?
A. NTP is NOT configured.
B. The XAPI Service stopped.
C. The XenServer DNS configuration is incorrect.
D. Communication with Active Directory has been lost.
Correct Answer: B

QUESTION 24
Scenario: An administrator tries to start a virtual machine on a host that has an NFS storage repository. The virtual machine gives the error “This virtual machine needs storage that cannot be seen from the server.”
Which action, within XenCenter, can the administrator take on the NFS storage repository to correct this issue?
A. Repair
B. Forget
C. Detach
D. Set as default
Correct Answer: A

QUESTION 25
Scenario: An administrator manages a XenServer resource pool consisting of six XenServer hosts. A Windows XP virtual machine runs on a shared NFS storage repository. The administrator needs to migrate the Windows XP virtual machine to another host but CANNOT.
What must the administrator do to migrate the Windows XP virtual machine?
A. Install XenServer Tools on the virtual machine.
B. Suspend and then migrate the virtual machine.
C. Enable multipathing on the virtual machine hard drive.
D. Place the virtual machine on shared Fibre Channel or iSCSI storage repository.
Correct Answer: A

QUESTION 26
An administrator of a Provisioning services environment notices that several of the target devices that are configured to use a vDisk on the provisioning server are randomly failing to start and shut down.
What should the administrator check to prevent this issue from occurring?
A. The SOAP Service is running.
B. High availability is enabled on the vDisks.
C. The target devices are configured to start up from hard disk.
D. All network switch ports have spanning tree protocol disabled.
Correct Answer: D

QUESTION 27
Scenario: An administrator is troubleshooting a Provisioning services environment. After the administrator configured a new version of the vDisk for 10 identical target devices all running on the same XenServer host, the administrator discovers that only the first target device started with the new vDisk configured. The other nine target devices failed to startup.
What is one of the steps the administrator should take to resolve this issue?
A. Configure the PXE Service.
B. Configure the bootstrap file.
C. Restart the Stream Service.
D. Change the vDisk access mode.
Correct Answer: D

QUESTION 28
Scenario: An administrator is troubleshooting a Provisioning services farm that consists of two identical servers and 100 identical target devices. 1Y0-A26 dumps From the Provisioning Services Console the administrator notices that one of the provisioning servers has twice the amount of target devices connected compared with the other provisioning server. The vDisk used and the provisioning servers are configured to use high availability and load balancing.
What should the administrator check to correct load balancing?
A. Power Rating
B. Bootstrap options
C. vDisk access mode
D. Offline database support
Correct Answer: A

QUESTION 29
An administrator needs to configure dynamic memory control (DMC) for Microsoft Windows XP SP2 virtual machines in the XenServer pool.
What must the administrator do before DMC can be configured on the virtual machines?
A. Update the static memory range.
B. Upgrade to a XenServer Platinum license.
C. Upgrade the virtual machines to Microsoft Windows XP SP3.
D. Run the param-name=memory-static – {min, max} command.
Correct Answer: C

QUESTION 30
Scenario: An administrator is trying to start two new virtual machines in a XenServer resource pool in which several virtual machines are already running.
However, the virtual machines will NOT start.
What should the administrator do to get the two new virtual machines to start?
A. Disable XenServer Tools.
B. Configure workload balancing.
C. Enable dynamic memory control.
D. Assign virtual machines to a vApp.
Correct Answer: C

QUESTION 31
Scenario: An administrator needs to increase the maximum memory range from 1 GB to 2 GB on a virtual machine configured with dynamic memory control. The virtual machine runs Windows Server 2008, has XenServer tools installed, and it is currently in a running state.
What should the administrator consider prior to adjusting the memory configuration of the virtual machine?
A. The XenServer host needs to have enough available memory.
B. XenServer workload balancing needs to be enabled on the host.
C. The virtual machine needs to be moved to another resource pool.
D. The virtual machine needs to be restarted in order for the changes to take effect.
Correct Answer: D

QUESTION 32
Which two policy modes must the administrator apply to implement a XenServer workload balancing policy to reduce power consumption and energy costs during off peak hours? (Choose two.)
A. Maximize Density
B. Fixed Optimization
C. Maximize Performance
D. Scheduled Optimization
Correct Answer: AD

QUESTION 33
Which two policy modes must the administrator apply to implement a XenServer workload balancing policy to help reduce power consumption and energy costs during all hours? (Choose two.)
A. Maximize Density
B. Fixed Optimization
C. Maximize Performance
D. Scheduled Optimization
Correct Answer: AB

QUESTION 34
Which two steps should an administrator take to back up the configuration of a virtual machine in XenServer on a regular basis? (Choose two.)
A. Schedule virtual machine metadata.
B. Access the resource pool configuration.
C. Access the backup, restore and update option.
D. Configure a scheduled snapshot of the virtual machine.
Correct Answer: AC

QUESTION 35
Which action must an administrator take to configure unattended backups of virtual machine configurations?
A. Schedule virtual machine metadata.
B. Schedule a virtual machine snapshot.
C. Configure virtual machine protection policies.
D. Configure a script for exporting virtual machines.
Correct Answer: A

Useful Citrix CCA 1Y0-A26 dumps pdf practice materials and study guides free download from leads4pass. Helpful newest Citrix CCA https://www.leads4pass.com/1y0-a26.html dumps pdf training resources which are the best for clearing 1Y0-A26 exam test, and to get certified by Citrix CCA, download one of the many PDF readers that are available for free with high pass guarantee.

The Following Are Some Reviews From Our Customers:


You can click here to have a review about us: https://www.resellerratings.com/store/leads4pass

Why Choose/Select leads4pass?

leads4pass is the best IT learning material provider. Other brands appeared early, Citrix CCA 1Y0-A26 dumps exam questions are not the latest and it is very expensive. leads4pass provide the newest and cheapest questions and answers. leads4pass is the correct choice for IT learning materials, help you pass your exam easily.

High quality Citrix CCA 1Y0-A26 dumps vce youtube demo:

https://youtu.be/VAXM9Hs0vqc

Are you ready for Citrix 1Y0-250 exam test? The best useful Citrix CCA-N 1Y0-250 dumps pdf practice files and vce youtube demo update free shared. Newest helpful Citrix CCA-N 1Y0-250 dumps exam questions and answers free download from leads4pass. “Implementing Citrix NetScaler 10 for App and Desktop Solutions” is the name of Citrix CCA-N https://www.leads4pass.com/1y0-250.html exam dumps which covers all the knowledge points of the real Citrix exam. Latest Citrix CCA-N 1Y0-250 dumps pdf training materials and study guides update free try, pass Citrix 1Y0-250 exam test easily at the first time.

High quality Citrix 1Y0-250 dumps pdf practice files: https://drive.google.com/open?id=0B_7qiYkH83VRTjJMYWJrMWZnZ2M

High quality Citrix 1Y0-253 dumps pdf practice files: https://drive.google.com/open?id=0B_7qiYkH83VReUZUSGNLaFVDM0U
1Y0-250 dumps
QUESTION 1
Scenario: An administrator plans to troubleshoot connections to the SSL virtual server configured on the NetScaler by using the WireShark tool. The administrator created a network trace file.
What will the administrator need to decrypt the network trace?
A. NS-root key
B. NS-server key
C. Private key of the root certification authority
D. Private key of the certificate that is bound to the virtual server
Correct Answer: D

QUESTION 2
Scenario: A number of administrators received the following error when they attempted to connect to the Configuration Utility using a secured HTTPS connection:
The site’s security certificate is not trusted!
One of the administrators installed a certificate from a trusted Certificate Authority on the NetScaler and is planning to configure the Configuration Utility to use this certificate.
Which NetScaler command must the administrator run at the command-line interface to configure the Configuration Utility with the new certificate?
A. set ssl service
B. set ssl vserver
C. bind ssl service
D. bind ssl vserver
Correct Answer: C

QUESTION 3
Scenario: A company currently has a working production XenApp and NetScaler environment. An administrator recently implemented a test NetScaler environment and tried to duplicate the NetScaler Gateway configuration from the production environment in the test environment. When the administrator configured the Secure Ticket Authority in the test environment, the Secure Ticket Authority showed a DOWN state. The administrator verified that the Secure Ticket Authority state shows as UP on the production NetScaler.
What should the administrator check to troubleshoot the issue?
A. NetScaler route table
B. NetScaler Gateway Resources
C. NetScaler Gateway Session Profiles
D. Secure Ticket Authority server IP address
Correct Answer: A

QUESTION 4
When a user launches a published version of Notepad, the user receives the following error message:
“Cannot connect to the Citrix XenApp server.SSL Error: The proxy denied access to 10; STA393B6A5D1088; 9764757E39D0BEBB0BFC66E9EE146FF4 port 1494.” 1Y0-250 dumps
What could be the cause of this error message?
A. Web Interface CANNOT reach the XML broker.
B. Web Interface CANNOT reach the XenApp server.
C. NetScaler Gateway CANNOT reach the XenApp server.
D. NetScaler Gateway CANNOT reach the Secure Ticket Authority server.
Correct Answer: D

QUESTION 5
Scenario: An administrator configured link load balancing to balance outbound traffic between two Internet Service Providers. When testing the configuration, the administrator notices NetScaler is unable to connect to any external addresses.
Which mode should the administrator verify is enabled?
A. Layer 3
B. Layer 2
C. Use Subnet IP
D. Use Source IP
Correct Answer: C

QUESTION 6
Scenario: For auditing requirements, NetScaler administrators are required to use their Active Directory accounts to log on to NetScaler. All NetScaler administrators belong to the NSAdmins Active Directory group.
Which configuration must an administrator create in NetScaler to meet the requirements of the scenario?
A. User accounts
B. NSAdmins group
C. Authorization policy
D. Service Groups policy
Correct Answer: B

QUESTION 7
Scenario: An administrator is implementing a two-factor authentication solution with an RSA SecureID product. The administrator already has the server name and port number of the RSA server.
Which additional information does the administrator need to configure RSA SecureID?
A. LDAP password
B. Firewall access rule
C. Authentication policy
D. RADIUS shared secret
Correct Answer: D

QUESTION 8
Scenario: An administrator is creating a NetScaler Gateway virtual server for mobile devices only.
The administrator must include two-factor authentication.
Which two steps must the administrator take to configure two-factor authentication for this environment? (Choose two.)
A. Bind the RSA policy first.
B. Bind the LDAP policy first.
C. Create an authentication policy.
D. Create a pre-authentication policy.
Correct Answer: A,C

QUESTION 9
Scenario: An administrator implemented RADIUS with NetScaler Gateway as a two-factor authentication solution for a XenDesktop implementation. A planned outage is scheduled in wake of a software upgrade on the RADIUS infrastructure. During the outage, the administrator needs to disable the two-factor authentication on NetScaler Gateway to enable users’ continued access to published applications. 1Y0-250 dumps
Which action could the administrator take to meet the needs of the scenario without affecting the connected users?
A. Delete the RADIUS authentication policy.
B. Set the RADIUS policy to be secondary authentication.
C. Disable authentication on the NetScaler Gateway virtual server.
D. Unbind the RADIUS authentication policy from the NetScaler Gateway virtual server.
Correct Answer: D

QUESTION 10
In which format should an administrator save the AppExpert Template files in order to import and upload to the NetScaler?
A. XML
B. ASP
C. CSV
D. HTML
Correct Answer: A

QUESTION 11
Scenario: A company had a single datacenter location with a single NetScaler installed. A second datacenter location was added and an administrator installed a second Citrix NetScaler at the second datacenter location. The NetScaler is used for load balancing internal infrastructure solutions.
The administrator plans to configure the environment so that it will continue to work even if there is a datacenter failure. Only the primary datacenter location is connected to the Internet. The configuration has to be synchronized automatically so that the configuration of both appliances is always identical.
How should the administrator configure the NetScaler devices so that continuity is maintained in the event of a datacenter failure?
A. As a GSLB cluster
B. In a VRRP configuration
C. As a high availability pair
D. As standalone appliances
Correct Answer: C

QUESTION 12
An administrator notices that a NetScaler high availability (HA) pair has changed the primary node several times in the past few days due to intermittent issues.
What could the administrator configure to ensure that HA failures are alerted?
A. SNMP
B. Syslog
C. Route Monitors
D. Failover Interface Set
Correct Answer: A

QUESTION 13
Which command-line interface command could an administrator use to display communication between the LDAP server and the NetScaler system? 1Y0-250 dumps
A. cat /etc/krb5.conf
B. cat /etc/krb5.keytab
C. cat /tmp/aaad.debug
D. cat /var/log/aaad.debug
E. tail -f /var/log/aaad.debug
Correct Answer: C

QUESTION 14
Scenario: An administrator configured an LDAP authentication policy and bound it globally. The only system group configured on the Netscaler is NS_Admins. After reviewing the security logs, the administrator notices that users in the External_Contractors LDAP group are able to log on to NetScaler using SSH; however, members of the External_Contractors group are NOT authorized to run any commands.
Which action could the administrator take to prevent the members of the External_Contractors LDAP Group from logging on to NetScaler using SSH without affecting other users?
A. Configure an authorization policy that allows logon only by members of the “External_Contractors” LDAP Group. Bind the new policy globally.
B. Specify (memberOf=”CN=External_Contractors, CN=Groups, CN=example, CN=com”) as a filter in the properties of the configured LDAP server.
C. Specify (!(memberOf=”CN=External_Contractors, CN=Groups, CN=example, CN=com”)) as a filter in the properties of the configured LDAP server.
D. Create a new command policy with a DENY action. Create a System Group named “External_Contractors” and assign the new command policy to the External_Contractors group.
Correct Answer: C

QUESTION 15
After restarting one node on a two-node NetScaler cluster, an administrator notices that the node that was restarted no longer accepts traffic.
Which action could the administrator take to resolve this issue?
A. Run the nsconmsg -g feature -d stats from the shell.
B. Run the sync cluster files command from the command-line interface.
C. Replace the cluster license file and restart the NetScaler software only.
D. Restart the NetScaler software and operating system for the failing node.
Correct Answer: C

The best and most updated latest Citrix CCA-N 1Y0-250 dumps exam practice materials in PDF format free download from leads4pass. High quality Citrix CCA-N https://www.leads4pass.com/1y0-250.html dumps pdf training resources which are the best for clearing 1Y0-250 exam test, and to get certified by Citrix CCA-N, download one of the many PDF readers that are available for free, high pass guarantee.

Latest Citrix CCA-N 1Y0-250 dumps vce youtube: https://youtu.be/9CSJXoO1hjY